Contact us

Search result for:

Home / Products / PT2026 NMR Precision Teslameter / Model 1426 NMR Pulsed-Wave Probes

Model 1426 NMR Pulsed-Wave Probes

PT2026 accessory

Model 1426 NMR Pulsed-Wave Probes

Pricing :

 4’400 CHF

Model 1426 pulsed-wave probe, Hydrogen sample, with remote measurement head, standard range

(prices are indicative)

See all prices

Pricing : 4’400 CHF
Model 1426 pulsed-wave probe, Hydrogen sample, with remote measurement head, standard range

Pricing : 5’100 CHF
Model 1426 pulsed-wave probe, Deuterium sample, with remote measurement head, standard range

Pricing : 5’400 CHF
Model 1426 pulsed-wave probe, Hydrogen sample, with remote measurement head, custom range

Pricing : 6’100 CHF
Model 1426 pulsed-wave probe, Deuterium sample, with remote measurement head, custom range

(prices are indicative)

Description

Designed for the PT2026 NMR Precision Teslameter, the Model 1426 probes provide unprecedented precision, using the Pulsed-Wave detection principle.

Passive head

The new “remote measurement head” form factor fits into small gaps and is ideal for high-radiation environments. The standard length of the remote-head cable is 50 cm; custom lengths may be available, depending on the probe range.

A single connector for the RF and other signals make it easy to plug and unplug.

Extended range

Five standard probes from the hundreds of milli-Teslas to the tens of Teslas. The range minimum and maximum values in the following table are guaranteed values; each probe is individually programmed with its actual usable range.

Model designationRange minimum (T)Range maximum (T)
1426-0.19-0.520.190.523 mm, Hydrogen / natural rubber
1426-0.42-1.290.421.293 mm, Hydrogen / natural rubber
1426-1.13-3.521.133.523 mm, Hydrogen / natural rubber
1426-3.29-10.573.2910.573 mm, Hydrogen / natural rubber
1426-8.00-22.808.0022.83.6 mm, Deuterium / heavy water

Custom ranges are available upon request.

The electronics are housed in a “Metrolab standard ” copper tube, familiar from the PT2026 model 1326 probes as well as the PT2025 model 1060 and 1062 probes. The dimensions are as shown in the figure below (click to enlarge):

The dimensions of the measurement head are are as shown in the figure below (click to enlarge):

The standard cable length is 10 m. Custom lengths are available upon request. Alternatively, all probes can be used with a model 3026 extension cable.

Accessories

Other PT2026 accessories

Model 1326 NMR Pulsed-Wave Probes

Model 1526 NMR Pulsed-Wave Probes

NMR probe multiplexer MUX6026

1100-20 Gradient compensation coil up to 20G/cm

1100-40 Gradient compensation coil up to 40G/cm

ACC-1060 Gradient compensation coil up to 100G/cm

PT2026 probe-extension / MUX cable

TC8026 Transit Case